#45/B, 1st Main,
J.P Nagar III Phase
Banguluru – 560 078, INDIA

Tel : +91 80 41489056
Email: Prasanna@imagex.in

Diverter Damper


Imagex Technologies has design, manufacturing and testing expertise in the field of Diverters, Dampers, and Isolators, which can offer sealing efficiencies up to 99.9%. Both single seal and twin seal arrangement can be offered along with various types of actuators.

Exhaust from large diesel engines has higher temperatures, which can be passed through heat recovery units to tap available energy. This requires hot gas ducting, isolation devices etc, to lead the hot gases to heat recovery units. The system becomes complex when there are multiple engines operating. Imagex Technologies has the required expertise for handling the hot gases up to 600 Deg C and provide effective leak tightness across isolation devices.

* Dampers can be produced in any size diameter, length x width, or face-to-face.

* Carbon steel or stainless steel are standard for body and blade construction, but any weldable alloy can be used. FRP (Fiberglass Reinforced Plastic) can also be used for body and blade construction.

* Design pressures are normally up to 60" wc but higher design pressure dampers are available.

* Dampers are available with several different types of seating configurations: scissor seat, metal-to-metal seat, step seat, resilient seat, tadpole seat, or teflon o-ring seat.

* Castable or blanket refractory is utilized for higher temperature applications; up to 2200ºF.

* Solid plate blade design is standard. For higher pressures, dampers are furnished with reinforcing blade stiffeners. Air foil blades are also available.

* Teflon bearing and packing are standard but other types of bearing and packing materials are available.

* Dampers can be furnished with a variety of actuating and control mechanisms.



News And Events News And Events News And Events News And Events News And Events News And Events News And Events